Micro-line 1050 SS Filters

HiFlux Micro-line 1050 SS filters in stainless acid-proof EN 1.4404 steel are designed as a compact inline universal filter with many applications.

The filter is supplied as a bag or strainer filter and can be fitted with a mag-netic system for efficient retention of magnetic particles.

The filter is designed for a 16 bar design pressure at temperatures of up to 110°C (water) or according to customers requirements.

The lid is designed in such a way that it can be opened and closed quickly -without using tools, which makes cleaning fast and simple so for the filter to be put back into operation quickly.

In the bag filter version the filter is used where there is a need for reliable fine filtering from 1 micron with a large dirt capacity. Filter bags are available in several material types and filtration ranges (see also data sheet for filter bags).

In the strainer filter version the filter is used where there is a need for a large flow and dirt capacity and a small differential pressure.

As standard the direction of flow is from the inside and out through the filter insert. The dirt is retained in the filter insert, which can be lifted out and cleaned. It is possible to use the strainer filter with reverse flow. This means that the dirt is retained on the outside of the strainer and it is possible to remove the sludge from the filter by fitting a valve into the drain.

The filter can be fitted with a unique magnetic system which makes it possible to collect magnetic particles as small as less than 1 micron. The magnetic insert is designed as an integrate part of the bag insert for simple and fast handling -again without any use of tools -in connection with cleaning.

The magnetic insert is of the HiFlux type which is fitted with Neodymium magnets. In comparison to conventional ceramic magnets provides a mag-netic field which is seven times stronger, resulting in significant increases in both efficiency and capacity.

Fittings for suspending the filter can also be supplied as an extra option and should be fitted directly on to the filter housing.

The filter is shown with DN 50, PN16 EN 1092-1 flanges. Other connection types can be supplied in accordance to customers specifications. Standard with R2 nipples.

For other options see also HiFlux Micro-line 1050, HiFlux TS and HiFlux TP filters.